Automotive, Cylinder Hone, KEN5032940K

Cylinder Hone

For honing of brake cylinders and piston bores with capacities between 19 - 68mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. Overall length 200mm. 
For storage purpose legs are retained in position by a triangular clip. This can be removed using long nose pliers. or tweezers and should be retained for futher use. Replacement stone sets available.

Use brake fluid for cutting lubricant.

Packaging dimensions (W x H x D): 70 x 297 x 30mm.

Gross weight: 105g.